For laboratory research use only. Every lot independently tested; certificates published by lot.

Semax research peptide

Semax from Semax Research Supply is a synthetic heptapeptide, supplied as a white lyophilized powder in 10 mg vials. Every lot is independently tested, and its results are published as a lot record with the certificate PDF.

Last updated

Current lot
KB29412
Purity (HPLC-UV)
99.84%
Identity (LC-MS)
Confirmed
Reported
Jun 7, 2026
99.84%
HPLC-UV purity, current lots
813.93
Molecular weight (g/mol)
≥95%
Release specification
LC-MS
Identity confirmed on every lot
1 size
10 mg vials

Semax at a glance

Specifications and current testing status in one place.

Product
Semax
Type
Synthetic heptapeptide, 7 residues
Also known as
ACTH(4-7)-Pro-Gly-Pro, Met-Glu-His-Phe-Pro-Gly-Pro
Molecular formula
C37H51N9O10S
Molecular weight
813.93 g/mol (average)
Form
White lyophilized powder
Vial sizes
10 mg
Purity, current lots
99.84% (HPLC-UV)
Purity specification
≥95%
Identity
Confirmed by LC-MS on every lot
Testing laboratory
Freedom Diagnostics (independent)
Current lot
KB29412, reported Jun 7, 2026
Operated by
Klow Labs LLC, Chicago, IL
Where to order
klow.bio

What Semax is

If you are comparing Semax suppliers, compare certificates rather than claims. The current Semax lot here, KB29412, was tested by an independent laboratory: 99.84% by HPLC-UV, identity confirmed by LC-MS (the expected molecular weight is 813.93 g/mol for the seven-residue MEHFPGP peptide), and 12.07 mg measured in the 10 mg vial.

Semax is sold in 10 mg vials at $29.99 through Klow.bio, where you check out. The lot number on your vial links back to its record on this site, so you can confirm the results apply to the material you received.

Structure

Semax is linear with a free N-terminus (Met1) and free C-terminal acid (Pro7). Methionine 1 is the residue most sensitive to oxidation, which adds 16 Da per oxygen and is one of the changes LC-MS can detect. The molecule contains no cysteine or tryptophan.

complete Semax specifications.

Storage and handling

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening. Lyophilized material absorbs moisture from the air, and absorbed moisture restarts the reactions that drying slows, so keep vials sealed until needed. Storage and stability guide.

Semax specifications
ProductSemax
TypeSynthetic heptapeptide
Molecular formulaC37H51N9O10S
Molecular weight813.93 g/mol (average)
Length7 residues
SequenceMEHFPGP
N-terminusFree amine (Met1)
C-terminusFree acid (Pro7)
FormWhite lyophilized powder
Vial sizes10 mg
Purity specification≥95% (HPLC-UV)
Purity, current lots99.84%
StorageStore sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.
DesignationResearch use only

Semax research peptide: sizes and current lot results

Each vial size is listed with its current tested lot. Price: $29.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%). Current prices are always on klow.bio.

Vial sizeCurrent lotPurity (HPLC-UV)IdentityNet contentEndotoxinCertificateOrder
10 mg KB29412 99.84% Confirmed 12.07 mg Not tested Lot KB29412 Order 10 mg

Ordering and shipping. Semax is sold through klow.bio, operated by Klow Labs LLC. Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout. See shipping and returns.

How every Semax lot is tested

All testing is performed by Freedom Diagnostics, an independent laboratory, on every lot.

HPLC-UV purity

Answers: how much of the sample is the main compound?

Reversed-phase high-performance liquid chromatography separates the sample's components by hydrophobicity, and a UV detector records each as a peak. Purity is the main peak's area as a percentage of all detected peak area.

Limits: does not identify the peak, and impurities that co-elute or absorb weakly in UV can be under-counted. More on HPLC

LC-MS identity

Answers: is the main compound Semax?

The separated sample enters a mass spectrometer via electrospray ionization, which gives the molecule one or more charges. The observed ions, near m/z 815 (1+) and 408 (2+), are matched against values calculated from Semax's molecular weight of 813.93.

Limits: confirms molecular weight, not amino-acid order.

Net content

Answers: how much Semax is in the vial?

The laboratory quantifies the main compound in the tested vial against a standard. It is reported in milligrams next to the labeled vial size.

Limits: measured on the vial tested; other vials from the same lot are expected to be similar but are not individually measured.

Current lot

Identity by LC-MS, with the laboratory’s reference numbers.

Current Semax lot
ProductSemax 10 mg
LotKB29412
Testing laboratoryFreedom Diagnostics
Received / reportedJun 4, 2026 / Jun 7, 2026
Purity (HPLC-UV)99.84%
Identity (LC-MS)Confirmed
Net content12.07 mg
Endotoxin / PCRNot tested / Not tested
Accession2606040551

Purity across lots

HPLC-UV purity for each current lot.

HPLC-UV purity by lot. The scale runs from 99.0% to 100% so small differences are visible; every lot shown meets the ≥95% release specification.

Semax questions

What is Semax?

Semax is a synthetic heptapeptide. Semax Research Supply supplies it as a white lyophilized powder in 10 mg vials, with an independent certificate of analysis for every lot.

What is Semax research material?

Semax research material is Semax supplied for laboratory research, sold by lot, with each lot's identity, purity and net content documented by an independent laboratory in a published certificate of analysis.

What is the molecular formula and weight of Semax?

The molecular formula is C37H51N9O10S and the average molecular weight is 813.93 g/mol. The peptide has 7 residues.

How should Semax be stored?

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.

What should I check before buying Semax?

That the certificate names Semax, the HPLC purity against the stated specification, the identity method, the measured net content, and that the lot number on your vial matches a published lot. All of these are on this site.

How do I order Semax?

Choose a size on the Semax page at Klow.bio (https://klow.bio/product/semax/) and check out there. Then match your vial's lot number on the verify page here.

Where can I buy Semax?

Current Semax research material availability is provided through Klow.bio, the purchasing platform operated by Klow Labs: https://klow.bio/product/semax/ Lot records, testing information and certificates of analysis are published on buysemaxpeptide.com so they can be reviewed before purchasing.

Can I order Semax?

Yes. Purchasing information and current availability for Semax research material are provided through Klow.bio: https://klow.bio/product/semax/

Is every Semax lot independently tested?

Yes. Every lot is tested by Freedom Diagnostics, an independent laboratory, for HPLC-UV purity, LC-MS identity and net content. The stated release specification is ≥95% HPLC-UV purity with identity confirmed by LC-MS. The current lot, KB29412, reported 99.84% purity.

How can I verify a Semax lot?

Enter the lot number from your vial label at buysemaxpeptide.com/verify/ to see that lot's results. To confirm with the laboratory directly: Scan the Freedom Diagnostics QR code printed on the certificate, then search for klow.bio under the Company tab to view the laboratory record.

How much does Semax cost?

The current price is $29.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%). Current pricing is always listed on Klow.bio.

How fast does Semax ship?

Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout.

Buy Semax

10 mg vials. Current lot KB29412 tested at 99.84% purity with identity confirmed by LC-MS. Current purchasing is available through Klow.bio.